I have no objection to anyone using my card designs but my Blog and I would appreciate a mention. Thank you to all who read my Blog and leave a comment. I really do appreciate every one of them and do my utmost to reply as soon as possible.
Crafty hugs to all!


Tuesday, 29 April 2014

Mahogany Monochrome

Hi Folks !  Well another 'little' post from me.  This time it is another of my pictures.  I have made this for my Hubby's up and coming 50 th (so don't tell him ).  I am also going to enter this into the Clarity Stamp Challenge, Monochrome.  I am a bit late in posting this (so what's new ) as I not only did the picture but I have stained and waxed the pine frame to co-ordinate.  The frame was a very pale pine and as the colour of the ink I used for the picture is Ranger Distress Ink - Aged Mahogany, it took me  a while to get the shade right and then I had to wax it a few times after that.

So on with the show and tell!  I cut a piece of canvas 51 x 21 cm and taped up the edges with masking tape. I took two pieces of copy paper, joined them together. I cut along the length of this to get the shape for my hills.  I put in a moon mask over to the right of the picture and then added a bit of a sky with my large Clarity Stencil Brush and my chosen colour which as I mentioned above was Aged Mahogany. I used another roughly torn piece of paper and a make-up sponge to add a horizon and to add shading for the hills.

Designed by Emma Burns, Handmade in Scotland, http://emmburns.blogspot.co.uk/

I chose my stamps all from Clarity stamp ( as them's the rules)- Split Tree, Mini Pear Tree, Large Birch Leaf, Small Birch Leafsmall leaf (used for grasses), Grasses 2, Grasses 3 and Tree ( used for hedgerows ) and finally Pointillism Stamp ( used for added ground texture)




I stamped the bare split trees and then stamped them with the Small Beech Leaf.  Next was the Mini Pear Tree.  I took the edge of a tree stamp to make my hedgerows (where we are living now they are everywhere...only the real ones are so very neatly trimmed. )  I then added shading and the grasses around the two trees.  I added the tall grasses 2 and 3 to the bottom.  Next the Large Beech Leaves to the top corners of the picture.  I decided to add some more shading with my trusty make-up sponge and Clarity Stencil Brushes

Designed by Emma Burns, Handmade in Scotland, http://emmburns.blogspot.co.uk/

So all that was left was for me to put the picture in the frame and take some photos...well guess who had a day off work. Yep that's right Hubby.  And guess who wanted to sit out in the sun. Yep Hubby.  In the end I sent him to the local shop just so that I could get a picture in good light which in itself brought problems of trying not to get a reflection of myself in the picture.  Oh well done now!

Hope you like it !  

Congratulations to Jane Morris for winning the Flower Power Challenge.  Congratulations to the other Top 5 Picks too.  Barbara Lancaster, Shelagh Metselaar, Lynne Bishop and Andy Duggan.  Very well deserved and I feel very honoured to be among you. (also happy to get another Top 5 button for my Blog )xxxx 

Happy crafting. 

Emma xxx



Sunday, 27 April 2014

Just a Note

Hi Folks !  A little card here using Clarity Stamps.  I made this card for a friend who had recently undergone an operation and was well into her recovery and I just wanted to let her know I was thinking of her.

I decided to use my new Small leafy Swirl  stamp along with the sentiment Just a Note.  I love the leafy swirl stamps and the font of the sentiment blends in nicely with them.  I have used only one ink pad Archival Brilliance - Pearlescent Lavender.


I began by stamping the leafy swirl around the edges of my Card Blank, 'blotting before plotting' as Barbara Gray is always saying.



I then taped up a piece of Textured Card with Low Tack Tape and stamped the swirl at an angle.  Next I stamped the sentiment followed by the swirl again.
I then part stamped the swirl in the opposite corners but this time adding a blotted image too.


I shaded in the corners using my Clarity Stencil Brushes.  I removed the Low Tack Tape and taking my ink pad I ran it along the edges of my image.  I finally
attached this piece to my already stamped card blank with double sided tape













I do like the effect of the shading in this card which unfortunately is quite hard to see.  I went for a light touch rather than having dark corners as it suited the colour of the ink better.


Designed by Emma Burns, Handmade in Scotland, http://emmburns.blogspot.co.uk/

I hope you like it.

Happy Crafting!

Emma xx

Playing with my Melt Pot.

Hi Folks! Once again I have been a bit remiss in doing my Blog Posts.  Surely you can forgive me as I have had a good reason...the SUN has been shining!  I have also been doing a bit of landscaping in my new garden (with the help of my husband and son.  They do all the donkey work...I just point and tell them where to put things, I was allowed to plant the bulbs though)

I have to admit that I haven't made many cards this month but I have been playing with my Melt Pot.  I have been making moulds from some of the embellishments I have in my craft stash and practising my technique of pouring the UTEE in them.  So far I feel they are not up to sharing...a few air bubbles got missed here and there but I am getting better, will share when I feel they are up to scratch.

But what I am proud of is the flowers that I have made using two new dies from Sizzix.  I got a load of new things from their recent sale, saved over a £120 BARGAIN.


I used Rose 3D 658504 to make this lovely rose. 
Designed by Emma Burns, Handmade in Scotland, http://emmburns.blogspot.co.uk/

It is a spiral die and very easy to use.  I added a couple of leaves  from my stash - a Marriane Die - coloured them with a Pro Marker before sticking them to the back.  I then dipped them in my Melt Pot.  Not bad for a first attempt me thinks!

Susan's Garden Mini Lily 658408


I then went on to make these two lovely Orchids.  I started with white paper and coloured the petals and leaves with a Pro Marker.  The only thing I didn't like was the stamen part of the die so I decided to use some of my wire that I still have from when I used to make flowers from Petal Paste.  The wire has a coating on it that you can colour with pens like the Pro Markers.  I just folded the wire over ( concertina ) and then snipped the folds at one end.  I bent the ends over and coloured the tips with a brown Pro Marker.  Using the wire made it easier to glue into the middle of the flowers too.

Designed by Emma Burns, Handmade in Scotland, http://emmburns.blogspot.co.uk/

So now I am going to have a play and see what flowers I can produce from these dies as I have had a request to decorate some boxes with them.  I have one more post to write for today and then I had better get a move on as I still have a challenge to enter too, running out of time this month.  Note to self...get organised girl!

I would love to hear what you think about my flowers, all comments welcome especially if you have any tips to pass on.


Happy Crafting!

Emma xx