Art Journal - Grunge Paste, Suede, Gilding Flakes

Hi Folks! Hope you are all recovering from the recent festivities! I thought that I would share with you today a little project that I never got around to until this week.  Bad on my part as I should have organised myself better!
A few months back I treated myself to a Zutter Bookbinder and I have only used it a couple of times, mainly for punching holes. But I changed that today as I finally finished a book from scratch!

I have uploaded two pictures of the front cover as I couldn't get the lighting right.  Looking at them side by side anyone could be mistaken and think that they were two different Books!

I put the the bare chipboard covers through the Zutter followed by the inner pages. I decided to cover the inside front and back covers with a couple of 8 x 8 sheets from an enchanted pad so I had to put these through the Zutter too.  I attached the sheets using A4 Double Sided Sticky Sheets (obviously cut to fit) after I had decorated the front and back covers.

Front cover

I began by stencilling Grunge Paste onto the Front Cover.  I used 3 small leaf Stencils from Clarity Stamp Ltd. along with a Heart Stencil.  More about that later.

Leaf-1-Double-Mini-Stencil-4-x-4-Inch bottom left and right hand edge

Leaf-2-Double-Mini-Stencil-4-x-4-Inch bottom right and middle left

Leaf-3-Double-Mini-Stencil-4-x-4-Inch top left

Just before the paste was completely dry, I made an impression into 3 of the leaves with some Clarity Stamps. I scratched the effect of veining into Leaf 3.  I also used the Elder Stamp here and there on the cover.

Small-Crackle-Clear-Stamp Leaf 1

Imagine and Elder Leaf 2

While the paste was drying I set about the back cover.  Inside - 8 x 8 Enchanted Page as mentioned above.  Outside - I wanted a soft feel to the back as the front would be rough.  I decided to attach some Suede.  I cut a piece of brown suede to just slightly less than the 8 x 8 as I also wanted to put in a border of Gilding Flakes (I wanted to have neat edges to the material and also to cover the edges of the chipboard) so out came the double sided sheet again for the suede and a narrow roll of Double Sided Tape for the Gilding Flakes - Variegated Copper from Clarity Stamp. I prefer to use the ones from Clarity as the Flakes are a decent size and the tub is full to the brim - others that I have tried have been disappointing, really small flakes, half empty tubs, even flakes that are clumped together - not flaked. 

I put the double sided sticky sheet onto the back first. Pulled a bit of the protective layer back. Laid the suede on this bit and gradually pulled the layer back smoothing from the middle outwards lightly using the same spreader I used for the Grunge Paste.  I very carefully laid the Narrow roll of Double Sided Tape along the edge of the Suede to the edge of the board.  I had to put tiny bits of tape between the punched holes.  

Then things got a bit messy as I had a sneezing Fit.  The gilding flakes went everywhere.  The red backing of the DS Tape was covered in it...static...I hate it!!!

I then had to deal with the edges.  This was tricky trying to balance the board, pulling of backing, gilding flakes and STATIC!  But job done and pleased with result.  Now back to the Front Cover.

White Acrylic paint left to dry.  Had a coffee.  Blended 2 Yellows and then 2 Greens with a Blue.  Also Red and Violet. All applied with Clarity Stamp Stencil Brushes.

I added some scrap netting (underskirt from a wedding dress - Bride ripped it off at the reception as it was just too much and tossed it at me and said I could probably do something crafty with it) then added a bit more Acrylic paint, this time a Brown.

I let this dry before adding some Gilding WAX.  White Gold, Green Gold, Red.  I blended these in with Kitchen Roll and fingers.  I used a blending stick to add a bit more detail to the word IMAGINE. During all this I went in a few times with copy paper and lifted some of the wet paint off.
As I said before, depending on the light it can look quite shiny in places or really dark and grungy
Final touches were adding two metal letters C B and a fixing to keep the book closed.  I should have added the letters while the paint was still wet and they would have been more embedded.


Another bit of Kitchen Roll and gave it all a polish before putting the Ozwire in and through the Zutter.  Now looks like a book!

I took an old chain  and snipped it here and there to get the pieces I wanted. It is fixed on the back of the book so that when the chain is opened the chain won't fall off and get lost.  I attached one end of the chain along with a smaller bit, a Key - which I added some gems, a small heart - Made With Love and a hoop for the Clasp to grab onto. I added a hoop and a Clasp to the other end.

And there you have it!  I hope that you all like it and maybe give this a go.  There are other ways to bind covers together if you do not have access to a binding machine.  Make yourself a little art journal from scratch.  This was made for someone dear to me but  think I will make myself one too.  If you do have a go, let me know and take a photo and I will share it on my blog.

If anyone has any questions please leave a message and I will get back to you asap.  Now enjoy, go have fun with paste and paint!

Happy Crafting

Emma x

Bliadhna Mhath ùr dhuibh, Slàinte mhath!

Wishing you all the very best for 2015 xx

Hi Folks!  This is a double first for me today!  This is my First Card for 2015 and it is also...

drum Roll Please - no! - oh well I will get on with it.

This is my First Day as a Design Team Member for claritystampchallenge.blogspot.co.uk  I am so much a Happy Crafter at the moment!!

I was thrilled to bits (as you can imagine) when Barbara Gray asked me to join the Design Team for the Clarity Stamp Blog ( I got hubby and son out of bed) but then I had to keep it a secret (been really hard that, sorry friends).

I will be in the company of Sazzle, Linda Page, Naomi Mahon and Yvonne Froelich who are from the original Design Team.  There are a few of us making up the New Design Team for the Challenge Blog and of course they will be introducing themselves today too. Angela, Amanda, Julie, Barbara, Carol M, Carole P, Lesley and Shelagh I am so looking forward to working with you all.

January's Challenge is: Things with Wings! 

I decided on what I wanted to do, but spent a lot of time dithering about what colours I should use.  In the end I went for a simple design in Monochrome. I found a lovely simple backing paper in my stash and I knew I could match the colours.  So my little piece below is done in Archival Ink - Potting Soil and a bit of Adirondack Ink - Slate for shading in the sky.

Stamps used

 Small Matrix Feather 

Scroll - from Artist Set

Swallows - from Journaling Set

Bird Song Verse - by Maya Angelou

Tree Branch - from Fly away Kit

Tape a sheet of A5 Theuva Card to copy paper, stamp the Feather first. (2nd Gen Ink) Then cover with a post -it note mask.
Next stamp the Scroll in 2nd Gen ink.
Stamp in the Verse and then cut out a mask for the Scroll.
I used a Clarity Moon Mask, they come in various sizes but you can use a punch to make one.  Place it wherever you want.

Copy paper next, torn to make hills. Clarity Stencil Brush, Potting Soil ink for foreground and just a little bit in the sky. Adirondack - Slate was added to the edges at the Sky.  

Remove Moon Mask and with 1st and 2nd Gen Potting Soil ink, Stamp in the Tree Branch on the right side.  I kept the masks over the Feather and Scroll until I had finished stamping the Branch on that side too.  Looks a bit of a mess just now eh!

When the masks and all the masking tape is removed from the edges it makes quite a difference! Close ups of the 2nd Gen Inking. Click on image to enlarge.

I have put in a shadow below the Feather and the Scroll and drawn a shaky line around the edge with a Spectrum Noir Pencil no. 109 and 104. Trim picture and mount with Double sided tape onto desired backing paper and trim.  You can then place your image into a suitable frame.  Remember to sign your work first though! Or you can mount this onto a card blank like I did.
Oh! Just remembered that I took a brown sharpie to the edges of the backing paper before mounting.  (Sorry I was under the influence of excitement).

These are the two sets that I took stamps from and the other stamps and tools used

So I hope you like my little contribution and please feel free to have a go.  

All the stamps used are of course from Claritystamp ltd .  

Why not have a go at the challenge.  £50 Voucher to spend at Claritystamp for the Winner and the Top 5 get to showcase their work.  The winner is chosen by Random.org.  So no matter what level of crafting you feel you are at everyone has a fair chance of winning.

I hope to see your entries out there. http://claritystampchallenge.blogspot.co.uk/  The Rules of the Challenge are on the Blog for you to see.

Best of Luck!

Emma x

Trees!!!

Hi Folks!  I hope that you all had a wonderful Christmas.  A quick post from me today (that's if blogger lets me, it has been freezing up on me for days).

This is a picture that I wanted to show you all but couldn't until now as it was a Christmas gift for someone.  With this piece I have used the Gelli Plate to make a reflection...so much easier using the Gelli Plate for this!

I used a sheet of Super smooth Card from Clarity Stamp (for use with the large Gelli Plate).  It is brilliant for stamping and shading.

I stamped my Trees and the Deer onto the Gelli Plate which I had mounted onto the Clarity Mega Mount (fabulous thing). I then used the Gelli Plate like a stamp and stamped onto my card.  I then turned my image around and then this time stamped my Trees and Deer directly onto the card.

I added some 'banking' along the waters edge using my mini Fern and one of the mini Leaves from a remountable set.

I covered the 'land' with copy paper and went to work on the water.  This was done using a Brayer, scrunched up copy paper, two shades of Memento Ink: Nautical Blue and Summer Sky.  The same colours were used with the Brayer (minus the copy paper) for the sky.   I used the Yellow ink from a Big n Juicy Pad - Soothing Sunset with a Stencil Brush. The deer are stamped in Adirondack Black, the Trees and Foliage are stamped in Memento - Olive Grove.  I drew in the small birds in flight with a Black Micron Pen.

I added more foliage to the top and bottom of the picture using Olive Grove again and then with a make-up sponge I added a bit more shading using Memento - Pistachio.

I decided at the last minute to add a bit more shading and foliage to the waters edge with the mini remountable leaf before framing.

All the products that I have used to create this picture, from the Stamps, Card, tools to ink have all been supplied by Clarity Stamp.  If anyone wishes details for anything I have used, leave a comment and I will forward you the details. I usually do a link for each product but as blogger is playing up and it has taken me nearly a week to get this posted I just wanted to keep going before it stalled on me again...apologies!

I hope you like it.  

I am entering this picture into the Clarity Stamp Challenge for December as the challenge is Trees.

Good luck to everyone in all their challenges and I hope that you all have a wonderful 2015.

Hugs to all

Emma xx

I think everyone may get a Jumper for Christmas!!

Hi Folks!  Hope you are all well and have everything in hand for Christmas!  I keep thinking I am sorted but then I get distracted and my schedule goes to pot.  What have I been distracted with......
It's this new stamp set......Christmas Jumper from Clarity Stamp......I can't seem to put it down, having so much fun with it!

Today I was all set to mount some images that I had made and get them posted, I was only having a small coffee break when another idea for the Jumper Set came to me and that was it, back to craft room to Play instead of keeping to the plan!

My idea for the Jumper Set was to make a card look as though the Jumper was gift wrapped!

So I got Shrink Plastic and 3 colours of Archival ink.  Stamped twice for each colour (A4 sheet).  I cut out the jumpers one at a time with a craft knife...now of course you will be saying Duh! does she think were stupid!...NO I do not, I just have a tip to pass on (could have just written Top Tip I here you say).








Before I cut each jumper out, I attached a small bit of masking tape to a corner so that once the jumper is free of the sheet you can pick it up by the tape to move it (just in case ink not dry).  Then if you are doing a batch you can attach your jumpers to a door or wall until you need (or have space to work on them)


I used the mini stamps from the set on some of the jumpers but I also did one with a mini Snowman and one with the NDC stamp for December 2014 STAG.  I did have to mask of the sleeves of the jumper to fit him in.

I did only loose one jumper to the ravages of the heat gun...I just couldn't get it unstuck! and I thought that it was the best one!

After I had shrunk the Jumper using my heat gun I gave it a quick spray of Iridescent Varnish.  I attached the Jumper to a square of Hand made tissue.  (I folded in the corners to put in some creases). I then attached this to a piece of Red Tartan paper (on the underside).  Layered again with White Satin Card and more Red Tartan (Top Tip...put ribbon behind first layer of Red Tartan BEFORE doing the rest of the layers - how do I know that this is important.  lol. The final layer being an 8 x 8 card blank.

To bring a bit of sparkle to the design I added some Gold edged Peel-offs.  I the got a little price tag and stamped a small Snowflake in 3rd generation ink ( Meadow), wrote To: and From: in Poppy Promarker. (I used the pen to colour the white string of the price tag.  I made a bow, curled the papers and attached the embellishments with silicone glue.  By this time the lighting was terrible and the Red is really Red so maybe that was a good thing!

Now all that was left was to make a tiny roll of Sellotape and add to card.  Stamp Inside with my Bespoke Christmas stamps.  Put away the envelope that came with the card (as I need to make a box for it now). Make Box. Take photos. Do Blog Post.

   

DONE!

All the stamps used are from Clarity Stamp Ltd.

The NDC stamp is from Clarity Stamp too.  It is the free stamp for this month for New-Design-Club Members.  http://www.claritystamp.co.uk/New-Design-Club

I hope you like this.  Please feel free to leave a comment, I read and appreciate everyone of them and I do my utmost to respond as soon as I am able.

Christmas hugs to all

Emma x

Winter Warmers Galore!

Hi again Folks!  So as I have been busy what with Christmas shopping, Cleaning House, Wrapping Presents etc.   I decided to have a break and catch up on some of my favourite crafters and their Blogs! The first one that I caught up with was Barbara Gray.  (Sorry ladies I didn't get around to looking at anyone else's yet...I got distracted).

Lo and Behold Barbara had Posted about The Christmas Jumper Set!  But not only that....Barbara had done her YouTube video that she does every Tuesday.  So being a fan I checked it out....I felt so silly.

I fiddled about with Post-it Notes for my Jumpers in my two previous posts and then I saw what Barbara did and I am glad that no-one was around to hear what I said to myself!!!!

You have a choice now! You can either read on or you can go to Barbara's Blog by clicking on  LINK or you can go direct to YouTube and search for Claritystamp Christmas Jumper and all will become clear.

So for this post I am going to copy what Barbara Gray did for her YouTube Tuesday!

This time I have stamped onto two different materials, a cotton and a webbing and backed with double sided sticky sheets.  Now just to show you that I am obviously not firing on all cylinders the photo on the left is a bit squint! Reason...I stamped this one out then attached it to the double sided sheet. Much better to attach your material to the sticky sheet first!  Never mind, I did manage to salvage it.  (I have taped them down to stop them slipping around)

What Barbara did instead of messing about with Post-it notes making makeshift masks, was to cut up the Jumper Mask into its parts to isolate them.  These masks that are produced by Clarity Stamp are tacky so that they will stick to any surface.  (they need a little bit of de-tacking before first use but after that you are sailing as they do not tear your project and can be used time and time again)

outer part

inner part

in bits!

Now why didn't I think of that!

Simples!!











So I set about stamping in my pattern.  (I did make a mini post -it note mask for the stag....Barbara did this too).  I then proceeded to follow her example.








Now I am not going to show you the finished card as yet because I will be posting it out to someone for this Christmas but below is what came about by me watching Barbara Gray.

I decided to do two jumpers as you can see and I will be following Barbara's example and mount them on card and then onto Hessian.

colours used

If you look at my post of the 10th December Winter Warmer you will get the details of the Christmas Jumper set or you can go from the link of Barbara's Blog (even better as she has reduced the price of them).  Remember  The Jumper itself can be stamped with any small stamp not just the Christmas stamps.

And I have one more bit of advice...when stamping onto material, check the grain.  The reason my first one went squint was because I didn't check which way the weave was going.

If I had only thought about it a bit I could have had the effect of knitted rows!

Give this a go.  I think it is very effective.  Thank you very much Barbara Gray for sharing.

Hugs to all.

Emma xx

Another Winter Warmer!

Hi Folks!  Well time is certainly running fast this year, it's nearly over and I still haven't finished all my Christmas cards!
I have another Christmas Jumper card to show you.  I am even more happier with this one!

Right here we go, this is how I made it!

I stamped the Jumper onto Cream Satin Card with Denim Adirondack Ink and then sprinkled on Clear Embossing Powder and Heat Set from underneath.
I then placed my own Circle Mask onto the Card and then on top of that I placed the Jumper Mask (outer piece).
I covered up the arms with post-it notes and started building up my pattern.  I moved the notes and covered up the body to get the stamping on the sleeves.  I then removed the outer mask and replaced it with the inner part for the actual Jumper.




I stamped the Forest Ridge into place.  I then dabbed some Denim onto my Clarity Blending Mat and using a make-up sponge put in a little shading around the Jumper - pulling the ink from the mask onto the card.  I used the sponge to build up a bit shading for the sky and shading for the snow.  




Before removing the Jumper Mask, I used my Clarity Stencil brush to go around the Circle lightly.  I then took a White Pilot Pen to put in a bit of snow here and there.

I removed the Circle Stencil and Jumper Mask then proceeded to layer up using Clarity Blue Pearl Paper (7" x 7") and a patterned paper from my stash.  Now I have only used ONE piece of the Blue Pearl Paper.  Because I use the Perfect Layers Rulers I was able to cut very precisely to achieve this.

I used the Christmas Greetings from my Bespoke Set of Christmas Stamps and made a little tag which I attached to the first two layers with a blue and white Twine.  (I shaded the tag a little with some of the ink that was left on the Blending Mat).  

So that is another one off my list!

I hope you like it!

Hugs 

Emma x

Winter Warmer!

Hi Folks!  Well I don't know about where you all live but the weather is atrocious down my way.  Very Cold, wet and very very windy!  So here is a lovely Christmas Jumper to keep you warm!

This picture  shows the stamps that I used making this card. This is the first time that I have used the Jumper Stamp set and my Personalised Dickens Script Stamps from Clarity Stamp and I have to say I am really chuffed with both sets.There is a lot more to both sets so follow the links for more details and to see the full sets. The Holly Wrap stamp is from Clarity Stamp too.  

This picture shows all the bits that I used along with the stamps to make the card.  So what do we have...
Cable Knit Stencil, Own Circle Stencil,
Big n Juicy Red ink pad, Adirondack - Meadow, Promarker - Poppy, Stencil Brush,
Perfect Layers Ruler, Double sided Tape, Masking Tape, Craft knife, scissors.
Copy paper and Theuva Card.




Step 1 )  Attach Circle Stencil to Theuva Card (cut into a square) with masking tape. Ink up Jumper with the Red ink and stamp into circle.  Cover Jumper with Mask.

Step 2) Attach Cable knit Stencil over the top. Dust lightly with the Adirondack and stencil brush.  Remove Cable knit stencil.

Step 3)  Remove the Jumper Mask and using Meadow, stamp in the pattern on the Jumper.  Then take a Poppy Promarker (with a fine nib) and colour in the jumper.

Step 4)  Remove the circle stencil and stamp pattern around the outer edge. Then stamp in the Holly Wrap stamp.

Step 5)  Mat and layer onto red card.  Stick image to backing card / paper with the double sided tape then use the perfect layers ruler and craft knife to get a perfect border.  Then attach to a Blank Card with strong double sided tape.

(To get a perfect match in the colours of red I used the chisel end of my poppy promarker on thin card before layering)

Step 6)  Using the lovely bespoke Dickens Script stamp message on insert (or if making a few of the same it might be quicker to just stamp the greeting directly onto the card)

Step 7)  Photograph work but try not to wait until it is too dark or the lights have fused (again!) in craft room.  Have a quick break and onto the next card!

I hope you like this, please feel free to leave a comment.

Hugs to all!

Emma x

More Fairies!!!

Hi Folks!  Hope you are all well out there.  I have two more Fairy cards to show and they will be my last for the year.
So lets get right down to it!  Here are the two cards.  I have mixed things up a bit with using stamps from my stash.  I have used a Papermania Fairy along with a Rubber mounted Christmas Cheer Stamp and the little Robin is from Clarity Stamp for the first card and I used two freebies from a craft mag along with a lovely Frame stamp from Clarity Stamp for the second card.

I stamped the Red Fairy and Heat embossed using Fine Detail Gold Powder onto Theuva Card, then stamped her onto a Post-it Note to make a mask which I covered her with. I placed my own Circle Stencil onto the Card and Stamped the Bauble Garland (which has the words too) in Adirondack Meadow.  I coloured the baubles with a Red Poppy ProMarker and a Gold Gel Pen.

I used a Clarity Stencil Brush and the Meadow ink to dust around the circle and then removed the Stencil.

I began to colour the red fairy using Red Poppy, Blush, Caramel, Fern Green ProMarkers and a little bit of Gold Gel Pen.  Once I was happy with her shading I stamped the Robin into place and coloured him in too with the ProMarkers.

I ran my Gold Gel Pen around the circle (very slowly and carefully...didn't need it to go wrong at this stage).  I then layered and matted the card using double sided tape, Perfect Layers Ruler, Craft Knife.
(I coloured the red backing paper with the Poppy ProMarker.)

For the Gold Fairy I stamped and heat set with detail Gold embossing Powder.  (don't forget to use talcum powder to reduce static) and then I stamped the lovely Frame with the Detail Gold too.

I made a mask for my fairy, put a post-it along one edge of the frame and then stamped in the Christmas tree.  I used a make-up sponge to put in a little bit of shading within the tree and I highlighted bits of it with my gold Gel Pen.

I used Promarkers -Lemon, Blush, Cardinal Red and Marsh Green along with my Gold Gel Pen and a White Pilot pen (for the dots on the Parcel)

I used Cardinal Red, Marsh Green again with my Gold Gel Pen to colour in the Frame.  I put in a bit of shading for the background and gave a bit of a shadow using a Cool Grey 1 Promarker. I then layered the image onto Green Dotty paper from my stash and mounted this onto a Blank Card.  I decided to finish it off by adding a little bit more sparkle by using clear gold edged Peel Offs.

So that's it for the Fairies, fun to do but now I have to get on with making my own Christmas Cards...way behind but will post some soon.   (have one to post in the morning)

Take care all

Big Hugs

Emma x

Travel

Hi Folks!  Hope you have all had a wonderful week!  I have been busy finishing off the orders for Christmas cards, hopefully now I can get on with my own Christmas cards and also the ones my husband needs for his work!  But I was required to take a little break from them as I had a friend who required a birthday card for a cyclist...

I decided to use my mini cyclist as I have two sizes of this stamp.  It is from Clarity Stamp (in fact so are the trees)  I will list them all at the end.

I stamped the cyclists in Archival - Potting Soil and used my ProMarkers to colour them in a bit (yeah  I actually got some of the tips to work) I then made some masks with Post-it Notes and covered the boys up.

I used Adirondack - Meadow to stamp the trees, shade all the little lumps and bumps in the ground (always was bumpy when I cycled)  I also added a bit of the Potting Soil too.  I used a make-up sponge for the bumps and then I used a Stencil Brush with Memento - Summer Sky for the sky!

I drew a fine line with a ProMarker around the edge of the image  and then trimmed it back a bit before mounting onto a blank card with double sided tape.

This reminds me of when my husband Alex used to take the Kids out when they were younger!

So all that is left is to add the Happy Birthday tag and it will be ready  to go.

Stamps used:
Cyclist
Forest Ridge
Tree   used at front and for foliage
Tree   used among the cyclists

I am off for a cuppa now but I will submit this into the Clarity Stamp Challenge for November which is Travel.  It is the preferred method  of transport for our family!

Happy Crafting Everyone!

Emma x

http://claritystampchallenge.blogspot.co.uk/2014/11/challenge-21.html